All Features
Chuck Pfeffer
“That’s so 27 seconds ago.” My daughter and I recently heard this catch phrase on a television commercial. We had a good laugh because there was some truth to it. We are living in a world of real-time updates, and it does not stop at news and social media. It extends to all facets of our lives.
In…
Belinda Jones
The Coordinate Metrology Society (CMS) has released the long-awaited results of its large-scale, interactive measurement study conducted during the 2011 Coordinate Metrology Systems Conference (CMSC), which was held July 25–29 in Phoenix. The 58-page report, “How Behavior Impacts Your…
Donald Jasurda
Manufacturers face many obstacles across the life cycle of delivering a product to market.
They often find themselves:
• Spending a lot of time reworking or repairing parts
• With parts that fail inspection, but fit and function properly when assembled
• With parts that pass…
The purpose of this article is to discuss automated analysis and report generation of
key characteristics measurement data. Key
characteristics (KCs) are those features of a
part whose measurements must be kept to
the nominal values through process control
to minimize the "Taguchi Loss…
The National Institute of Standards and Technology's (NIST) Center for Neutron Research is expanding the number of beamlines for research purposes from seven to 11 beams. The metrology tasks required to perform the installation of the new beamlines include the design and installation of a high-…
The buzz surrounding the Coordinate Metrology Society’s (CMS) efforts to bring an industry-recognized certification to the profession of portable 3-D metrology was nearly as prevalent as the buzz about the temperature at this year’s Coordinate Metrology Systems Conference (CMSC) in Phoenix. The…
Creaform Inc.
A patient had to undergo the surgical ablation of most of her nose because of a skin cancer that had attacked her right nasal septum.
Following the surgery, a cicatrization period had to be observed before a rhinoplasty was even considered. If no action was taken meanwhile, the patient was at…
The need for learning and certification of knowledge in portable coordinate measurement and large-volume metrology has been recognized by professional organizations such as the Coordinate Metrology Society (CMS) and major industrial end-users. During the past year, the United Kingdom’s National…
Belinda Jones
If you think the Coordinate Metrology Systems Conference (CMSC) is a run-of-the-mill conference, be prepared to have those preconceived notions shattered. There is a comfortable grassroots feel to this five-day event. Experts and novices alike talk metrology shop. Ideas and theories abound.…
Manufacturing speed and innovative designs are two crucial issues affecting whether or not a manufacturer can lead the mobile telephone market. Therefore, mobile phone manufacturers have put considerable efforts into accelerating the product development process, including the introduction of 3-D…
The purpose of this article is to present the planning of a case study performed in the field of geometrical and dimensional measurement and controllability planning (GMCP, previously abbreviated GICP). The case study is carried out at the Swedish automotive company Scania CV. This article presents…
InnovMetric Software
Aerodynamic Trailer Systems Ltd. (ATS) of Auburn, Ohio, has developed a new product that fits on commercial trailer doors to provide a more aerodynamic shape to the rear of the trailer. The object is a “Green Technology” to reduce emissions by improving fuel efficiency of over-the-road trucks. The…
Noncontact measurement is the fastest growing segment in the metrology world, with new methods and technologies being introduced every year. As with all new solutions, end users want to know how to evaluate the performance of these new products, and for that they turn to standards organizations.…
AICON 3D Systems
Uwira Oy , based in the West-Finnish harbor town of Vaasa, is part of the Leinolat Group, a corporation of six companies. Since 1993, the company has successfully manufactured welding products for the energy, shipbuilding, and machine-building sectors. One of Uwira’s special fields is the…
Automated Precision Inc.
Martin Säger, survey engineer at Wolz Nautic: The measurement of the templates clearly saved time.
Brothers Michael and Andreas Wolz manufactured 5,000 teak boat decks last year, a hand-crafted product with high requirements for quality. Their business, Wolz Nautic,…
The acronym MRO (maintenance, repair and overhaul) has long been part of the aerospace vernacular. But only recently have service providers adopted automated tools to streamline the upfront process of capturing and digitally reconstructing physical parts that require repairs or redesign.
The…
At the Harris Corp. (Government Communications Systems Division—GCSD), solid carbon-fiber and aluminum-shaped reflector dishes are manufactured to support military ground, sea, and air communications. These reflectors range in size from 1 to 13 m. To meet performance requirements, the surface…
Michael Raphael
There are many reasons why firms need to model the exterior contour of existing aircraft outer mold lines (OML). Most aircraft flying today were not designed in a modern 3-D CAD system. Even with a current 3-D digital design, the actual as-built contour deviates from the intended shape, at least…
Hiram Powers (1805–1873) is considered one the America’s great neoclassical sculptors. His works were popular in his time and remain so today. The Smithsonian American Art Museum (SAAM) has one of the most comprehensive collections of Powers’ work featuring major sculptures in marble, as well as…
Located near Montreal, Canada, the Nova Bus manufacturing team was routinely building many hundreds of complete bus frames per year. Production grew as new models were introduced. The addition of a new diesel electric hybrid design necessitated a re-examination of the quality inspection…
Dave Maxham
A joint project of NCMS called Volumetric Accuracy for Large Machine Tools (VALMT), partnering Automated Precision, Boeing, Siemens and Mag Cincinnati, has pioneered an innovative process and established new methodology in volumetric error compensation for large machine tools. Volumetric error…
Bob Cramblitt
Although he’s not one for clichés, Rus Emerick, process improvement specialist at Schneider-Electric, endorses this one: “The whole is greater than the sum of its parts.”
This concept, which dates back to Aristotle, is at the core of an approach called functional analysis that has…
(ISM: Tempe, AZ) -- The Institute for Supply Management (ISM) will present the 95th Annual International Supply Management Conference and Educational Exhibit April 25–28 in San Diego, California. The event includes four days of supply management professional development, training, and networking…
Belinda Jones
It is no coincidence that Astronics-Luminescent Systems Inc. (LSI) is a prominent supplier of aerospace lighting systems in three aircraft markets: commercial transport, military and business jets. For nearly a decade, Astronics has focused on expanding their product line to become a major…
In partnership with Metris UK, in this article we will discuss the utilization of modeling and simulation methods in the development of a revolutionary 7-axis Robot CMM Arm (RCA). An offline virtual model is described, facilitating pre-emptive collision avoidance and assessment of optimal…