All Features
The light-controlled factory (LCF) is a UK development project running for five years, from July 2013 to July 2018. It is directed by the University of Bath and supported by University College London (UCL) and Loughborough University. This ambitious project aims to demonstrate a “ubiquitous” seven…
Ben P. Stein
Paving the way for transforming the world’s measurement system, an international task force has determined updated values for four fundamental constants of nature. The updated values comprise the last scientific piece of the puzzle for redefining the modern metric system, known as the…
Gary Confalone
It starts with passion. Each year, my company, ECM Global Measurement Solutions, is invited to participate in an ever-increasing number of events, which introduces students and our future workforce to opportunities in the fields of science, technology, engineering, and math (STEM). These range…
Ashley Machin
Ortho Baltic, a manufacturer of patient-specific medical implants, recently invested in additive manufacturing (AM) and computed tomography (CT) inspection technology. It is vital for such components to be of outstanding quality, therefore an assured quality control system is integral to the…
David H. Parker
Electronic distance measurement (EDM) instruments, such as laser trackers, total stations, and handheld laser distance meters, have been used in a limited number of nondestructive testing (NDT) and structural health monitoring (SHM) applications attempting to measure bridge deflections and…
Greg Groth
In the following how-to, Greg Groth, Division Manager at Exact Metrology, explores the three steps of reverse engineering. Groth takes a dive into the due diligence questions that need to be asked before a job is started, and explores the technologies that can be used for data acquisition. And…
Hexagon Manufacturing Intelligence
(Hexagon: North Kingstown, RI) -- Hexagon Manufacturing Intelligence today announced it will showcase a new carbon composite inspection system for the aerospace industry in booth No. 1303 at WESTEC 2017, taking place at the Los Angeles Convention Center from Sept. 12–14, 2017. Based on Apodius 3D…
Gary Confalone
Last month, the 33rd annual Coordinate Metrology Society Conference took place at the Snowbird Meeting and Conference Center in the spectacular mountains of Snowbird, Utah. This signature event attracted the Who's Who in 3D portable metrology, from elite presenters to workshop instructors to…
Scott Everling
Two leading aircraft manufacturers, Boeing and Airbus, face a challenge many manufacturers would envy: an order book of close to 12,000 aircraft, representing between eight and 10 years’ worth of production. But what might appear to be a dream is proving to be a nightmare—asking customers to wait…
NIST
Researchers at the National Institute of Standards and Technology (NIST) have produced and precisely measured a spectrum of X-rays using a new, state-of-the-art machine. The instrument they used to measure the X-rays took 20 years to develop, and will help scientists working at the agency make…
FARO
A researcher from the University of Cambridge recently worked on the Bonavista Peninsula to get a better understanding of what’s left of some of the oldest organisms in the history of life on earth.
Paleontologist Emily Mitchell used portable 3D metrology equipment from FARO and Manchester…
Jean-Angelo Beraldin, David MacKinnon, Luc Cournoyer
Recent interest in portable coordinate measuring systems (CMS) has attracted the attention of industrial users and the technical community at large. Articulated arm coordinate measuring machines (CMMs) and optically tracked CMM (OTCMM) systems have emerged from being “nice-to-have” to “must-have”…
Keith Bevan
The 33rd annual Coordinate Metrology Society Conference (CMSC) is rapidly approaching in Snowbird, Utah from July 17–20. Preparations are moving forward at a land speed record pace, a reasonable expectation with the conference being held close to the Bonneville Salt Flats. The event has earned…
Alexander Schönberg, Mike Wehn, Alexander Richter
Measurement-assisted assembly has been integrated into the production flow in recent years. Many processes are designed for a high repeatability through fixtures and maximum stiffness. They approach an optimal operating point through iterative processes using measurements. This approach permits…
Belinda Jones
The Coordinate Metrology Society, in collaboration with UNC Charlotte, announced the fifth working meeting of the PrecisionPath Consortium for Large-Scale Manufacturing will be held on March 23, 2017, in Dallas, at the Hyatt Regency DFW, Terminal C. The PrecisionPath Consortium has worked steadily…
Keith Bevan
To kick off 2017, the Coordinate Metrology Society (CMS) has recently launched a new website and brand refresh with new features and old favorites such as technical papers, presentations, and technical reports, to name but a few. The organization is also in full swing preparing for the 33rd annual…
George LeGrand
One of the questions our customers ask most frequently is, “How often do I need to have my machine inspected for alignment?” Unfortunately, there isn’t a simple answer. There are a number of factors that can affect the alignment of equipment and these should be taken into consideration when…
Ben Rennison, Chris Greer
The advancement of dimensional scanning technology has allowed massive amount of point cloud data to be obtained quickly. This data is used for analysis and reverse-engineering functions. Generally, once this data is collected, it will be polygonized into a mesh which allows for easier data…
Belinda Jones
Dedicated members of the PrecisionPath Consortium gathered recently near the UNC Charlotte campus for their fourth working meeting and Technology Innovation Workshop in Charlotte, NC. The Coordinate Metrology Society and UNC Charlotte pilot the industry-driven coalition to advance large-scale…
Michael O’Shea
Being able to be in two places at once has been a dream for many metrologists in the measurement services business. Taking a page from the field of artificial intelligence (AI), ATT Metrology developed an “Expert System” to perform a wide range of measurement tasks based on more than 20 years of…
Keith Bevan
With this year’s Coordinate Metrology Society Conference (CMSC) behind us and 2016 rapidly coming to a close, new ideas are moving into full swing for CMSC 2017 in Snowbird, UT. The Coordinate Metrology Society (CMS) is in the process of revamping the conference agenda and addressing requested new…
Keith Bevan
Understanding the benefits of having sound knowledge, perspective, and the appropriate skill sets in metrology is just as crucial in today’s technological world as it was 50 years ago. The same goes for key decision making based on solid processes, procedures, methods, and data analysis. Taking…
Belinda Jones
A year ago, at the 2015 Coordinate Metrology Society Conference (CMSC), the PrecisionPath Consortium for Large-Scale Manufacturing started its journey toward building a sustainable, industry-driven coalition that continues to attract the brightest minds in manufacturing and metrology. The recent…
Third Dimension
(Third Dimension, Bristol, UK) -- Executive TV is excited to announce Manufacturing Change, the latest addition to their ongoing series of industrial documentaries exploring the United Kingdom’s manufacturing sector and its future. This program features Bristol-based Third Dimension, experts in…
API Services
Although it sank more than 150 years ago, the USS Monitor has an everlasting place in history.
As one of the first of the so-called "ironclads," the Monitor, along with its Confederate Army foe, the CSS Merrimack, fought to a draw at the Battle of Hampton Roads, VA, on March 9, 1862. From that…
