All Features
Trimble Navigation Ltd.
(Trimble: Sun City, South Africa) -- At the XIV International Congress of the International Society for Mine Surveying in South Africa, Trimble Navigation Ltd. introduced two new advanced features for its Trimble 4D Control software solution for monitoring systems. The new features include support…
Automation Technology GmbH
(Automation Technology: Bad Oldesloe, Germany ) -- With the new CX-Compact Sensors, Automation Technology presents a new generation of detector-heads for high-speed 3-D scanning. Its core comprises the world’s fastest high-resolution-sensors, available with a resolution of 2352 × 1728 pixels and a…
Sparta Systems Inc.
(Sparta Systems: Holmdel, NJ) -- In the past 12 months, the food and beverage industry has seen major recalls due to contaminants and bacteria present in a multitude of products. These recalls have cost companies millions of dollars in revenue, resulted in discarded supplies, and even caused…
Optech Inc.
(Optech: Toronto) -- Optech Inc., a manufacturer of advanced light detection and ranging (LIDAR) survey instruments, has released the new Intelligent Laser Ranging and Imaging System-Long Range (ILRIS-LR). This long-range 3-D laser imaging system has greater range and higher point density…
NIST
(NIST: Gaithersburg, MD) -- Every day is a metric day at the National Institute of Standards and Technology (NIST). But that won’t stop the agency from celebrating Metric Week, held annually the week of Oct. 10—the tenth day of the tenth month.
This year marks the 34th annual celebration of…
(CAP: Northfield, IL) -- Medical laboratories and health care organizations increasingly face the challenge of needing to do more with less. Yet, the expectation of continuous high quality patient care—which includes competitively priced fees—remains high. To help meet these expectations, the…
NIST
(NIST: Gaithersburg, MD) -- Scientists have long known that time passes faster at higher elevations—a curious aspect of Einstein’s theories of relativity that previously has been measured by comparing clocks on the Earth’s surface and a high-flying rocket. Now, physicists at the National Institute…
Stewart Anderson
Jack Welch, the famous and former CEO of General Electric (GE), once said that the markets in which GE competed were “brutally Darwinian.” The expression is apt because competitive markets always enforce a natural selection where only the fittest firms survive. As in nature, firms that can’t…
Donald Jasurda
The value of ongoing maintenance and prevention is no secret. We know we can save a lot of anguish and money by taking preventive actions today and every day to avoid major problems later. This principle also applies to the quality of the products designed each day by engineers.
The “…
Donald Jasurda
The value of ongoing maintenance and prevention is no secret. We know we can save a lot of anguish and money by taking preventive actions today and every day to avoid major problems later. This principle also applies to the quality of the products designed each day by engineers.
The “…
SPAR Point Group
(Spar Point Research LLC: Danvers, MA) -- SPAR Europe and Plant-Tech have joined forces to present an event on 3-D data integration and new 3-D technology applications across a range of industries, with a special focus on industrial plants, but also encompassing urban modeling, transportation,…
Spatial Corp.
(Spatial Corp.: Broomfield, CO) -- Spatial Corp., a provider of 3-D development components for design, manufacturing, and engineering applications, provides computer-aided design (CAD) translation with product manufacturing information (PMI) to Toyota Caelum Inc. for use in its latest software…
Leica Geosystems
(Leica Geosystems: Norcross, GA) -- Leica Geosystems is offering an online learning module for its HDS CloudWorx software application for AutoCAD. The modules are available online from any location with a PC and an internet connection. Students can progress through the material at their own pace…
CarMax Inc.
(CarMax Inc.: Richmond, VA) -- According to a recent telephone survey conducted for CarMax Inc., the nation’s largest retailer of used cars, more Americans say quality is the factor that most influences their car-buying decision.
More than one-third of Americans who have purchased a vehicle…
Olympus
(Olympus America Inc.: Center Valley, PA) -- The 2nd International Conference on Surface Metrology will convene at Worcester Polytechnic Institute in Worcester, Massachusetts, from Oct. 25–27, and will again be supported by Olympus America Inc., a provider of industrial measurement and imaging…
University at Buffalo
(University at Buffalo: Amherst, NY) -- Through the Center for Industrial Effectiveness, the University at Buffalo (UB) provides public training for lean Six Sigma. The fall course, Green Belt Blended Format—Wave 10, offers a unique way to become a lean Six Sigma Green Belt that can take place…
Thomas R. Cutler
Burger King’s advertising jingle during the 1970s was, “Hold the pickles, hold the lettuce. Special orders don’t upset us. All we ask is that you let us serve it your way!”
In late August, Sarah E. Needleman profiled in the Wall Street Journal that entrepreneurial manufacturers are experiencing…
ISO
(ISO: Geneva) -- World Standards Day is celebrated each year on October 14 to pay tribute to the efforts of thousands of experts worldwide who collaborate within the International Electrotechnical Commission (IEC), International Organization for Standardization (ISO), and International…
North Carolina State University
(North Carolina State University: Raleigh, NC) -- Researchers have long held that there are steps that can be taken to make brainstorming sessions more productive. New research from North Carolina State University (NCSU) finds that these recommendations actually do contribute to success when…
Tripp Babbitt
Systems thinking requires a massive change in the way organizations design and manage work. Old thinking must be flushed out so that new and better thinking can replace it. The outdated functional design of organizations according to the type of work performed needs an overhaul. Frederick Taylor,…
Plex Systems Inc.
(Plex Systems: Auburn Hills, MI) -- Plex Systems Inc., provider of the No. 1 rated ERP software for manufacturers, is offering live demonstrations of its comprehensive ERP solution for aerospace manufacturers on Tuesday, Oct. 12, from 2–3 p.m. EDT and for motor vehicle suppliers and manufacturers…
L.S. Starrett Co.
(L.S. Starrett Co.: Athol, MA) -- The L.S. Starrett Co. recently introduced Automotive Inspection Kits to help mechanics measure the proper distance or alignment between parts in a tightly confined space. While the two new inspection sets are ideal for measuring the amount of front-end play or…
IQware
(IQware: Cleveland) -- According to globally recognized futurist and innovation expert David Croslin, few circumstances drive innovation faster than being in a state of war. The U.S. health care system is now in a state of war. Consumers, government regulators, and enterprises are demanding change…
Society of Manufacturing Engineers
(SME: Dearborn, MI) -- The Society of Manufacturing Engineers presents the Aerospace Measurement, Inspection & Analysis Conference at the Gaylord Palms Hotel & Convention Center in Kissimmee, Florida, on Oct. 20–21. This two-day event focuses on the unique quality challenges facing those…
PPT VISION Inc.
(PPT VISION: Bloomington, MN) — PPT VISION Inc. announces a significant breakthrough in vision system technology and capabilities with its just-released IMPACT M-Series Embedded Vision System. The M-Series system allows users to perform up to four unique inspections that can be initiated…
